From Thorsten.Kopp at tzm.de Wed Jun 13 07:55:21 2007 From: Thorsten.Kopp at tzm.de (Kopp Thorsten) Date: Wed, 13 Jun 2007 09:55:21 +0200 Subject: configuration script for initializing the powerpc-eabi-gdb with a USB NEXUS Multilink Message-ID: <5B0591573C95AA42A0898D726C43D7F066BD37@rb8srv04.tz-mikroelektronik.de> Hi, I try to debug programs with the Sourcery G++ Lite debugger powerpc-eabi-gdb in Eclipse on a MPC5567-platform via the P&E USB PowerPC NEXUS Multilink. But I don't get a connection to the Mulltilink. Which initialize commands are required to download the elf-file and start the debugging process? Can anybody help me? Regards, Thorsten Kopp -------------- next part -------------- An HTML attachment was scrubbed... URL: From mark at codesourcery.com Fri Jun 15 00:23:36 2007 From: mark at codesourcery.com (Mark Mitchell) Date: Thu, 14 Jun 2007 17:23:36 -0700 Subject: configuration script for initializing the powerpc-eabi-gdb with a USB NEXUS Multilink In-Reply-To: <5B0591573C95AA42A0898D726C43D7F066BD37@rb8srv04.tz-mikroelektronik.de> References: <5B0591573C95AA42A0898D726C43D7F066BD37@rb8srv04.tz-mikroelektronik.de> Message-ID: <4671DC08.8090707@codesourcery.com> Kopp Thorsten wrote: > I try to debug programs with the Sourcery G++ Lite debugger > powerpc-eabi-gdb in Eclipse on a MPC5567-platform via the P&E USB > PowerPC NEXUS Multilink. But I don't get a connection to the Mulltilink. > Which initialize commands are required to download the elf-file and > start the debugging process? Sourcery G++ Lite Edition doesn't include support for the P&E Multilink. Our ColdFire toolchains do support the P&E debuggers, and we are considering adding Multilink support to our Personal and Professional Edition toolchains for Power. Best regards, -- Mark Mitchell CodeSourcery mark at codesourcery.com (650) 331-3385 x713