[coldfire-gnu-discuss] m68k-elf-sprite cannot talk to Coldfire board

[Daniel Jacobowitz]

(Thanks for including the -v output - that was very helpful :-)

On Mon, Apr 02, 2007 at 03:39:15PM +0200, Kevin Bube wrote:
> (gdb) load
> m68k-elf-sprite:Got packet: 'qXfer:memory-map:read::0,fff'
> Loading section .vector_ram, size 0x420 lma 0x0
> m68k-elf-sprite:Sent response: 'l<memory-map>
>   <memory start="0x0" length="0x4000000" type="ram"/>
>   <memory start="0x20000000" length="0x1000" type="ram"/>
>   <memory start="0x20001000" length="0x1000" type="ram"/>
>   <memory start="0x40000000" length="0x1000000" type="rom"/>
>   <memory start="0xfe000000" length="0x200000" type="rom"/>
> </memory-map>
> '

> m68k-elf-sprite:Got binary X packet: 'X4000500,40...'
> m68k-elf-sprite:error:Hardware device not ready
> m68k-elf-sprite:Closing P&E device
> Remote communication error: No error.
> (gdb)

Nathan, do we support flash programming on these boards (in 4.1-32)?
That's presumably a flash address, but IIRC it would be type="flash"
if we supported programming it.

-- 
Daniel Jacobowitz
CodeSourcery