From list-bastian.schick at sciopta.com Tue Nov 1 09:57:03 2011 From: list-bastian.schick at sciopta.com (42Bastian) Date: Tue, 01 Nov 2011 10:57:03 +0100 Subject: [arm-gnu] Test? In-Reply-To: <4EAB0DE2.2030008@mentor.com> References: <4EAB0DE2.2030008@mentor.com> Message-ID: <4EAFC26F.7030007@sciopta.com> Am 28.10.2011 22:17, schrieb Carlos O'Donell: > Testing the list. Alive and kicking! -- 42Bastian + | http://www.sciopta.com | Fastest direct message passing kernel. | IEC61508 certified. + From marcus.nissemark at crosscontrol.com Tue Nov 1 07:44:24 2011 From: marcus.nissemark at crosscontrol.com (Marcus Nissemark) Date: Tue, 1 Nov 2011 07:44:24 +0000 Subject: [arm-gnu] Does the ARM/Linux version support imx53 CPU Message-ID: <64BD9FFA3C4782459C03E7E6EC6BCFB3D233D4B8@MAIL-UA.ccs.local> Today we are using the CodeSourcery Tools (ARM GNU/Linux) for building our Linux solutions for mainly an Atmel At91 based CPU, but we've used it for an imx35 as well. Can we also use the same tool for the imx53? /Marcus From carlos_odonell at mentor.com Tue Nov 1 18:32:01 2011 From: carlos_odonell at mentor.com (Carlos O'Donell) Date: Tue, 1 Nov 2011 14:32:01 -0400 Subject: [arm-gnu] Does the ARM/Linux version support imx53 CPU In-Reply-To: <64BD9FFA3C4782459C03E7E6EC6BCFB3D233D4B8@MAIL-UA.ccs.local> References: <64BD9FFA3C4782459C03E7E6EC6BCFB3D233D4B8@MAIL-UA.ccs.local> Message-ID: <4EB03B21.50703@mentor.com> On 11/1/2011 3:44 AM, Marcus Nissemark wrote: > Today we are using the CodeSourcery Tools (ARM GNU/Linux) for > building our Linux solutions for mainly an Atmel At91 based CPU, but > we've used it for an imx35 as well. Can we also use the same tool for > the imx53? Yes, you can use Sourcery CodeBench Lite for ARM GNU/Linux to build a Linux kernel and userspace applications for an i.MX53 (Coretx-A8). Cheers, Carlos. -- Carlos O'Donell Mentor Graphics / CodeSourcery carlos at codesourcery.com +1 (613) 963 1026 From zakharov at ca.inter.net Tue Nov 1 16:43:48 2011 From: zakharov at ca.inter.net (zakharov at ca.inter.net) Date: Tue, 01 Nov 2011 12:43:48 -0400 Subject: [arm-gnu] Test? In-Reply-To: <4EAFC26F.7030007@sciopta.com> References: <4EAB0DE2.2030008@mentor.com> <4EAFC26F.7030007@sciopta.com> Message-ID: <20111101124348.14166uspzytc5gas@webmail.uniserve.com> +1 Quoting 42Bastian : > Am 28.10.2011 22:17, schrieb Carlos O'Donell: >> Testing the list. > > Alive and kicking! > > > -- > 42Bastian > + > | http://www.sciopta.com > | Fastest direct message passing kernel. > | IEC61508 certified. > + > _______________________________________________ > arm-gnu mailing list > arm-gnu at codesourcery.com > http://sourcerytools.com/cgi-bin/mailman/listinfo/arm-gnu > From marcus.nissemark at crosscontrol.com Wed Nov 2 21:10:51 2011 From: marcus.nissemark at crosscontrol.com (Marcus Nissemark) Date: Wed, 2 Nov 2011 21:10:51 +0000 Subject: [arm-gnu] Does the ARM/Linux version support imx53 CPU In-Reply-To: <4EB03B21.50703@mentor.com> References: <64BD9FFA3C4782459C03E7E6EC6BCFB3D233D4B8@MAIL-UA.ccs.local> <4EB03B21.50703@mentor.com> Message-ID: <64BD9FFA3C4782459C03E7E6EC6BCFB3D233E152@MAIL-UA.ccs.local> >> Today we are using the CodeSourcery Tools (ARM GNU/Linux) for building >> our Linux solutions for mainly an Atmel At91 based CPU, but we've used >> it for an imx35 as well. Can we also use the same tool for the imx53? >Yes, you can use Sourcery CodeBench Lite for ARM GNU/Linux to build a Linux kernel and userspace applications for an i.MX53 (Coretx-A8). I've heard that the floating point support is different for the imx53 than the imx35, and with that you likely need another set of vfp floating point libraries, or do the ones that exist as an add-on package to CodeBench work? I.e. is there another floating point flag needed as well? /Marcus From kitts.mailinglists at gmail.com Thu Nov 10 13:44:51 2011 From: kitts.mailinglists at gmail.com (Kishore Jonnalagadda) Date: Thu, 10 Nov 2011 19:14:51 +0530 Subject: [arm-gnu] Test? In-Reply-To: <20111101124348.14166uspzytc5gas@webmail.uniserve.com> References: <4EAB0DE2.2030008@mentor.com> <4EAFC26F.7030007@sciopta.com> <20111101124348.14166uspzytc5gas@webmail.uniserve.com> Message-ID: I noticed this list to be extremely silent and so checked in spam. Noticed that this mail was in spam. I notice that several mails to the list are spam and this mail (which is not spam) was automatically marked spam. Maybe someone to need to check the lists spam filters. On Tue, Nov 1, 2011 at 10:13 PM, wrote: > > +1 > > Quoting 42Bastian : > >> Am 28.10.2011 22:17, schrieb Carlos O'Donell: >>> >>> Testing the list. >> >> Alive and kicking! >> >> >> -- >> 42Bastian >> + >> | http://www.sciopta.com >> | Fastest direct message passing kernel. >> | IEC61508 certified. >> + >> _______________________________________________ >> arm-gnu mailing list >> arm-gnu at codesourcery.com >> http://sourcerytools.com/cgi-bin/mailman/listinfo/arm-gnu >> > > > > _______________________________________________ > arm-gnu mailing list > arm-gnu at codesourcery.com > http://sourcerytools.com/cgi-bin/mailman/listinfo/arm-gnu > From ashokcj at gmail.com Thu Nov 10 15:57:00 2011 From: ashokcj at gmail.com (Ashok Chandran) Date: Thu, 10 Nov 2011 21:27:00 +0530 Subject: [arm-gnu] relocation truncated to fit: R_ARM_PREL31 against `.main_mem_2' Message-ID: Hi, Am using the codesourcery toolchain. The linker exits with the following message when the segment main_mem_2 is placed at 0x6C000000: "relocation truncated to fit: R_ARM_PREL31 against `.main_mem_2'" I tried loading the function address via pointers , but that does not seem to matter. This is for a cortex-m4 processor. Why doesn't the the BLX/BX get picked to do the branch? Appreciate if you can help me out here. Thanks Ashok -------------- next part -------------- An HTML attachment was scrubbed... URL: From ricardo_anguiano at mentor.com Thu Nov 10 18:01:18 2011 From: ricardo_anguiano at mentor.com (Ricardo Anguiano) Date: Thu, 10 Nov 2011 10:01:18 -0800 Subject: [arm-gnu] Test? In-Reply-To: References: <4EAB0DE2.2030008@mentor.com> <4EAFC26F.7030007@sciopta.com> <20111101124348.14166uspzytc5gas@webmail.uniserve.com> Message-ID: <4EBC116E.1060704@mentor.com> On 11/10/2011 05:44 AM, Kishore Jonnalagadda wrote: > I noticed this list to be extremely silent and so checked in spam. > Noticed that this mail was in spam. I notice that several mails to > the list are spam and this mail (which is not spam) was > automatically marked spam. Maybe someone to need to check the lists > spam filters. I apologize for the spam that came through recently. We are trying to work out the issues with the spam filters. Thanks, -- Ricardo Anguiano Mentor Graphics From list-bastian.schick at sciopta.com Fri Nov 11 06:20:24 2011 From: list-bastian.schick at sciopta.com (42Bastian) Date: Fri, 11 Nov 2011 07:20:24 +0100 Subject: [arm-gnu] relocation truncated to fit: R_ARM_PREL31 against `.main_mem_2' In-Reply-To: References: Message-ID: <4EBCBEA8.4000701@sciopta.com> Hi > Am using the codesourcery toolchain. The linker exits with the following > message when the segment main_mem_2 is placed at 0x6C000000: "relocation > truncated to fit: R_ARM_PREL31 against `.main_mem_2'" > I tried loading the function address via pointers , but that does not seem > to matter. This is for a cortex-m4 processor. Why doesn't the the BLX/BX > get picked to do the branch? > Appreciate if you can help me out here. Where does the branch come from ? BLX can only jump a certain number of bytes wide (21bit IIRC). -- 42Bastian + | http://www.sciopta.com | Fastest direct message passing kernel. | IEC61508 certified. + From kitts.mailinglists at gmail.com Tue Nov 22 09:37:54 2011 From: kitts.mailinglists at gmail.com (Kishore) Date: Tue, 22 Nov 2011 15:07:54 +0530 Subject: [arm-gnu] When is the next (2011-q3) release? Message-ID: <9377404.3ZsoPVX4sG@kishore-zeus> In the past years the q3 release was usually out by this time. Is there a delay this year? -- Cheers! Kishore From wolf.arthur at gmail.com Tue Nov 29 21:26:22 2011 From: wolf.arthur at gmail.com (ARTHUR WOLF) Date: Tue, 29 Nov 2011 22:26:22 +0100 Subject: [arm-gnu] Suscribing. Message-ID: Hello. A colleage would like to suscribe to this mailing list, but can't find any information about how to do that on the web ( maybe because of the recent changes ? ). Any help ? Thanks a lot. -- Courage et bonne humeur. -------------- next part -------------- An HTML attachment was scrubbed... URL: